Technical Data Sheets
Rapid Cure Technologies continues to innovate for new start-up companies and fortune 500 goliaths. Rapid Cure supplies a myriad of solutions, from paints and coatings for the rail, oil, and gas industries to UV curable hard-coatings for optical plastics, sealants for hazardous electrical connections to flexible, corrosion inhibitive UV curable coatings for nearly every pipe/tube application.
Below, you’ll find information on some of our custom products and services. When you’re in need of specific information, please contact us here and a Rapid Cure Technologies Representative will be happy to help you.
TECHNICAL LITERATURE
RCT 02 1009 AD is a low gloss, acrylic, water-based industrial coating/primer designed for interior & exterior Direct to Metal (DTM) applications.
RCT 02 1009 AD Low Gloss Water-Based Black DTM Coating TDS.pdf
RCT 02 1045 AD is a high solids fast dry low HAPS modified alkyd for industrial interior or exterior direct to metal applications requiring good weathering and corrosion.
RCT 02 1045 AD Low Gloss Black TDS.pdf
RCT 02 1047 EP is a two component, epoxy primer designed for applications where excellent corrosion, moisture and water barrier properties are required. RCT 02 1047 EP is high solids, high build and especially suitable for marine and water submerged applications.
RCT 02 1047 EP Epoxy Primer TDS.pdf
RCT 03 1049 AD is a high solids air cured modified alkyd coating for industrial exterior direct to metal applications requiring good weathering, corrosion and water resistance.
RCT 03 1049 AD TDS.pdf
RCT 03 1058 AD is a low VOC water based elastomeric acrylic coating designed for exterior applications over a variety of substrates including asphalt & metal roofing.
RCT 03 1058 AD TDS 7.31.19.pdf
RCT 04 1052 EP is a two component, epoxy polyamide designed for applications where excellent corrosion, chemical, moisture and water barrier properties are required.
RCT 04 1052 EP TDS – HB HS LV Gloss Epoxy DTM.pdf
RCT 05 1017 AD is a high solids, fast dry, low emissions modified alkyd primer for industrial interior or exterior directto-metal applications requiring good weathering and corrosion.
RCT 05 1017 AD TDS 3.29.19.pdf
RCT 20 1010 AD is a low VOC air cured silicone coating for industrial interior & exterior direct to metal applications requiring excellent heat resistance, weathering, corrosion and water resistance.
RCT 20 1010 AD Hi Temp Aluminum TDS.pdf
RCT 20 1012 AD is a one component zinc filled bright aluminum epoxy designed for Direct to Metal applications where superior corrosion resistance is required.
RCT 20 1012 AD.pdf
RCT 100 Liner is a two component Novolac Epoxy designed for Direct to Metal applications where excellent corrosion and chemical resistance are required.
RCT 100 Liner.pdf
RCT 100G Liner is a two component glass filled Novolac Epoxy designed for Direct to Metal applications where excellent corrosion, chemical and abrasion resistance are required.
RCT 100G Liner.pdf
RCT DTMU is a high build isocyanate cured acrylic urethane for industrial exterior direct to metal applications requiring excellent weathering, corrosion and chemical resistance.
RCT DTMU TDS 9.20.18.pdf
RCT 02 1033 EP is a black, two-component, phenalkamine epoxy designed for applications where excellent corrosion, moisture, and water barrier properties are required. RCT 02 1033 EP is high solids, high build, and will cure at temperatures as low as 10°F in the presence of moisture. This product is especially suitable for marine and water submerged applications. Typical uses include: barges, drilling rigs, non potable tank interiors, heavy duty structural & pipe.
RCT 02 1033 EP One Coat Marine Epoxy – Black – TDS.pdf
RCT 02 1074 PU is an acrylic polyol-based resin for industrial polyurethane coatings designed for exterior applications. When used over the appropriate primer, a durable and highly weatherable coating system is produced. Applications include: trailers, pipes, tanks, structural steel & farm implements.
RCT 02 1074 PU TDS.pdf
RCT 02 1032 EP is a two component, epoxy polyamide primer designed for applications where excellent corrosion, chemical, moisture and water barrier properties are required.
RCT 11 1032 EP TDS – HS HB LV Beige Epoxy DTM Primer
RCT 02 1080 EP is a high-build, high solids, and low VOC two-component (2K) epoxy polyamide primer designed for applications where excellent corrosion, chemical, moisture, and water barrier properties are required.
RCT 02 1080 EP TDS HS HB LV DTM Epoxy Primer – Black – TDS.pdf